Architects
BWC_Architects_Blog_Tilte-Graphic.png

Blog

Goings on at the BWC Architecture Studio

The Wikipedia globe, now in 3D!

That's right! We've made the Wikipedia puzzle globe in 3D! No glasses required. IMG_8765

We started out with a 3D model, manipulating the globe in Blender to be flattened so it could hang against a wall.

corner2

wall_preview

After creating a satisfactory version, we "sliced" the model in our CAM software, and set up the job to be cut on our CNC machine, Frank.

Using Trupan, a certified sustainably harvested fiber board that is very soft and mills well, we first made a prototype. Always, always first make a prototype.

IMG_7603

Here at BWC, we only use certified sustainably harvested woods, as we want to ensure there will be those far in the future making wonderful things like this. As you can see from the prototype, the globe was milled on the machine in horizontal slices, then built up into it's final shape. We created the globe to have two removable puzzle pieces. You can see one here in the final large version...

IMG_7635

At this point the globe has been glued up and sanded down. Next, many repetitions of primer, sealing and sanding occurred, which eventually gave us this:

IMG_7722

A smooth surface, with the letters and the puzzle piece lines well formed. A full day and a half of hand painting was next up. We wanted the globe to have a very rich, tactile look to it. Hand painting is the only way.

IMG_8623

The letters and puzzle lines were painted in with meticulous care. The final globe has two removable puzzle pieces, and is coated with a waterborne lacquer to protect it from greasy finger prints. (We only use water based and water borne finishes here at Because We Can)

IMG_8740

And now for a quick demonstration:

IMG_8770

IMG_8769

IMG_8774

IMG_8772

The Wikipedia Globe in 3D, brought to you by Because We Can!

IMG_8781

Jillian Northrup